Mikrotik hAP ax³ Router WiFi6 4xGbE 1x2.5GbE Dual
€111.12
Tax excluded
The Mikrotik hAP ax³ Router WiFi6 4xGbE 1x2.5GbE Dual is a product of the Switches and Access Points section - New State Access Points.
| Brand | mikrotik |
| Model | C53UiG+5HPaxD2HPaxD |
| Hardware | - CPU: Quad core IPQ-6010 1.8 GHz - CPU: 64bit ARM architecture - RAM size: 1 GB - Storage: 128MB, NAND - Number of 1G Ethernet ports: 4 - Number of 2.5G Ethernet ports: 1 (supports PoE in/out) - USB: 1 USB 3 type A - Switch chip model: IPQ-6010 - Wireless interface model: QCN-5022 (2.4 GHz), QCN-5052 (5 GHz) - Wireless: 2.4 GHz 802.11b/g/n/ax dual-chain, 5 GHz 802.11a/n/ac/ax dual-chain - Maximum wireless antenna gain: 2.4 GHz (3.3 dBi), 5 GHz (5.5 dBi) - Dimensions: 251 x 130 x 39mm - Operating system: RouterOS, License level 6 - Operating temperature: -40°C to +70°C |
| wireless | - Rate (2.4 GHz) / Tx (dBm)/ Rx (dBm) 1MBit/s: 27 / -100 11MBit/s: 27 / -94 6MBit/s: 29 / -96 54MBit/s: 27 / -80 MCS0: 29 / -96 MCS7: 26 / -75 MCS9: 24 / -70 MCS11: 22 / -67 6MBit/s: 28 / -96 54MBit/s: 26 / -80 MCS0: 28 / -96 MCS7: 25 / -75 MCS9: 23 / -70 MCS11: 20 / -67 |
| Feeding | - Number of DC inputs: 2 (PoE-in, DC jack) - PoE input voltage: 18-28V - DC jack input voltage: 12-28V - PoE output: Passive PoE Ether1, maximum output per port (input < 30 V): 0.625 A - PoE-out total output power: 15 W - Power adapter rated voltage: 24 V - Rated current of power adapter: 1.5 A - Maximum power consumption (without accessories): 15 W - Maximum power consumption: 38 W Contains - 24V 1.5A power adapter - HGO indoor antenna kit - fixing kit - Base of the box |
| Review date | 09-27-2022 by MPM |
10 other products in the same category:
Ubiquiti NanoBeam AC NBE-5AC-Gen2 5GHz 19dBi
€63.36
€79.20
Prosafe Switch 8 Puertos Gigabit
€107.47
5-PORT 10G SWITCH CPNT
€182.93
OMADA 8-PORT GIGABIT MANAGED REVERSE POE...
€27.00
€30.00
‹
›
Reviews (0)