D-Link DEM-CB100S Cable SFP+ Attach Stacking 1M
€125.70
Tax excluded
El D-Link DEM-CB100S Cable SFP+ Attach Stacking 1M es un producto de la sección de Adaptadores red - Red cableada de estado nuevo.
| Marca | D-Link |
| Modelo | DEM-CB100S |
| Descripción | Cable SFP+ 10 GbE de conexión directa para serie de switches DGS-3420/3620 Tasa de transferencia soportada: 10 Gbps Tamaño: 1 m. |
| Otras caracterísiticas | - Impedancia del cable: 100 Ohms - Voltaje: 30 V AC, 0.5 A - Temperatura de trabajo: Desde -40ºC hasta 85ºC (-40 to 185ºF) - Certificaciones: SFP MSA, SFF-8431, EIA 364, UL 94 |
| Fecha de revisión | 05-03-2015 por J4V |
These 10G Passive SFP+ Twinaxial Direct Attach Cables are designed to support connections for 10 Gbps Gigabit Ethernet or Gigabit Ethernet switches with 10 Gbps Gigabit Ethernet uplink, much more faster than SFP which only supports 2.5 Gbps Gigabit Ethernet. With two cable models including the DEM-CB100S and DEM-CB300S, these cables are suitable for short distances up to 3 metres, and is ideal for highly cost-effective networking connectivity between switches and servers within a rack or in adjacent racks. These 10G Passive SFP+ Twinaxial Direct Attach Cables are certified to be compatible with D-Link products to provide you best performance and reliability.
Ideal for High-Bandwidth Operations
These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables support speeds of up to 10 Gbps, while having lower latency and power consumption than other cables types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T. This makes it an optimal solution for handling high bandwidth transmission within short distances such as inside energy-efficient data centres.
Enhanced Small Form-factor Pluggable Format
These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables use Enhanced Small Form- factor Pluggable format (SFP+) connectors. The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, resulting in lower costs, lower power disruption, and higher port density. Meanwhile SFP+ connectors use the same space-per-port as standard SFP connectors but support higher data transmission speeds.
Save on Costs
These D-Link 10G Passive SFP+ Twinaxial Direct Attach Cables feature SFP+ connectors on
both ends, thus eliminating the need for expensive SFP+ transceivers. This makes it more
cost-effective than fibre cables which must use SFP+ transceivers.
| Features | |
|---|---|
| Cable length | 1 m |
| Connector 1 | SFP+ |
| Connector 2 | SFP+ |
| Connector 1 gender | Male |
| Connector 2 gender | Male |
| Product colour | Black |
| AWG wire size | 30 |
| Data transfer rate | 10 Gbit/s |
| Certificates | |
| Certification | SFP MSA (Multi-Source Agreement)\nSFF-8431\nEIA 364\nUL 94 |
| Operational conditions | |
| Operating temperature (T-T) | -40 - 85 °C |
| Weight & dimensions | |
| Bending radius | 2.35 cm |
| Packaging data | |
| Package width | 267 mm |
| Package depth | 317 mm |
| Package height | 46 mm |
| Package weight | 250 g |
| Logistics data | |
| Shipping (inner) case net weight | 2.8 kg |
| Pallet gross weight (air) | 127 kg |
| Master (outer) cases per pallet (air) | 30 pc(s) |
| Products per pallet (air) | 300 pc(s) |
| Pallet height (air) | 146 cm |
| Pallet gross weight (sea) | 172.6 kg |
| Master (outer) cases per pallet (sea) | 42 pc(s) |
| Products per pallet (sea) | 420 pc(s) |
| Pallet height (sea) | 199 cm |
| Pallet gross width | 120 cm |
| Pallet gross length | 110 cm |
| Shipping (inner) case width | 33.6 cm |
| Shipping (inner) case length | 56.2 cm |
| Shipping (inner) case height | 26.5 cm |
| Shipping (inner) case gross weight | 3.8 kg |
| Products per shipping (inner) case | 10 pc(s) |
10 other products in the same category:
At-fs980m/9ps-50
€546.92
HPE Aruba IOn 1430 8G 64W Sw
€109.94
‹
›
Viewed products
Reviews (0)